Instructions for the .rar file
https://www.dropbox.com/s/icz90nramn56mf3/phantom2-tool.rar
1 dropbox.com/phantom2-tool.rar
(Download and unzip)
2 connect your Phantom2 Vision to the computer via USB
3 start the unzipped tool you just downloaded.
4 check mark the H3 2d box ( not the vision one)
5 close tool
6 start the Naza DJI Phantom 2 Assistant
7 x1 calibrate and you're done
https://play.google.com/store/apps/details?id=com.taco_rc.visionplusutilitypro
1. Power on both Phantom 2 Vision+ aircraft and range extender.
2. Connect your device to DJI Phantom Vision+ Wi-Fi network.
3
Make sure you have already launched the Phantom2 Tool and set to H3-2D mode..
4. Open Vision+ Utility app, slide the Enable Tilt Control switch.
5. Press Start to calibrate the X1 lever, slide the lever to min and max position and then press Done.
6. Open DJI Offical Vision app, and go to CAMERA mode