THIS IS ANOTHER PERSONAL IN ANOTHER THREAD
So my New Version Phantom 2 has:
-New 2312 motors
-ESCs without the "V2.0" or "V2.1" next to the QR Code software sticker.
-The power on Chime sound does not have the 4 extra beep tones at the end.
-On power on, there is no red LED lights on initiation.
https://www.youtube.com/watch?v=jph18PU ... e=youtu.be
-My Serial number is "PH645413862 V2.0"
Some stated that if you do not have the 4 extra beeps on power on then you have ESCs V2.0 despite not having the "V2.0" on the white QR code sticker. Can someone confirm this.
Also can someone confirm that serial numbers that start with PH645413 matches all the things that mine has. Or if you have the "Vx.x" on your ESC sticker what is your serial number.
As of right now I feel that despite not having the "V2.0" on ESC sticker, Not having the 4 extra beep tones on start up means I have V2.0 software. I will continue to fly the Phantom until there is new information.
-Ok so I have had 2 crashes with my Phantom where the ESCs were sure to have been overloaded / motors would have had sudden stops. 20+ flights later the phantom is still functioning properly without any obvious sighs of ESC trouble. This makes me feel that these ESCs do have the correct updated software.
-Now we need to find someone who can contradict my situation. Who has the non "V2.0" ESCs with No extra 4 beep tones who crashed / tipped over and has burnt bad ESC or Motor wires.