I am back to 1.6.8 So many disconnection with 86.So did .086 work ? What is the range
Sent from my Samsung Galaxy Tab S2 using Tapatalk
HTC 10 cihazımdan Tapatalk kullanılarak gönderildi
I am back to 1.6.8 So many disconnection with 86.So did .086 work ? What is the range
Sent from my Samsung Galaxy Tab S2 using Tapatalk
It's beta.So the new firmware is worse than 1.6.8???
I Will try.There is an .0090 version. https://s3-ap-northeast-1.amazonaws.com/dji-firmware-test/P3C/P3C_FW_V01.07.0090.bin
i't seems to be the lastest version. i can't try now, so if someone try it, please write down whats the opinion.
I was curious if there is any higher version beside that .0090 so i checked up to .9999 and there was nothing. Also checked V01.08 from .0001 to .0999 and also no files. In case of anyone wondering.There is an .0090 version. https://s3-ap-northeast-1.amazonaws.com/dji-firmware-test/P3C/P3C_FW_V01.07.0090.bin
i't seems to be the lastest version. i can't try now, so if someone try it, please write down whats the opinion.
I was curious if there is any higher version beside that .0090 so i checked up to .9999 and there was nothing. Also checked V01.08 from .0001 to .0999 and also no files. In case of anyone wondering.
I tried 1.7.9. Max Distance 300m then RC signal lost. Max height 120 m RC signal lost. My RC has got argtek antenna mod.
HTC 10 cihazımdan Tapatalk kullanılarak gönderildi
I will try.Thx for checking. I'm already active on this thread but my first phantom ever (3 standard) has just been sent to me by it's previous owner. I will be 3rd owner in just 3 months. Starting to wondering what might be wrong with that one. I'm worrying that i might also have that problem, but hope it will work ok.
So...
I've seen frenky600 post about his talking with someone affilated to DJI care and he heard that CE/FCC setting in the given time is set by app, not drone or controller GPS. Workaround to get FCC working is to delete app, change phone/tablet region and language to any FCC country and it should work as FCC. Could this be true?
Here is the link for his post:
How to Update Tx-Power with Magic Power v5.0
Buy another antenna for your remote, either argtek or itelite dbs. I got over 3 km twice with the Argtek,, over a nice open field tho.. And it depends if your in CE or FCCPossibly slightly unrelated but still relevant: How are some people here achieving distances of 3km?
I'm over here getting 300-400m on a good day in a rural field.
Is this normal for my Phantom 3 Standard? How could it be improved?
Chris P
Possibly slightly unrelated but still relevant: How are some people here achieving distances of 3km?
I'm over here getting 300-400m on a good day in a rural field.
Is this normal for my Phantom 3 Standard? How could it be improved?
Chris P
As many now know - I had serious problems trying to downgrade my new P3S ... in fact I lost control link.
Only when I flashed 1.7.9 to the AC did I get control back again.
My sequence was :
Original FW (I believe may have been 1.7.X) downgrade to 1.5.7 ................. lost all control of AC. Only DJi GO to camera was left.
Tried install 1.6.8 - no different ... no controol.
Installed 1.7.9 and all back to original state with control and unreliable video feed.
Today I tried to use Magic Power 5..... which refused to do anything.
So it looks like 1.7.9 locks you to that FW and you cannot alter the power.
I am only a new guy with this model - so someone else may have better experience of this set-up ... I just post what happened with mine.
You could say I am not very happy.
Nigel
You could try to increase the power with Icarus range mod. It worked for me with 1.7.86 (btw, I'm back to 1.6.8 since I got no real improvement with 1.7)