Well, I seemed to have fixed my VPS issue I have been plagued with after the 1.2.7 update on my P3A. Here is what seems to have fixed the problem:
Upgraded Firmware to 1.2.8. I then saw the firmware upgrade to the UAV was a success by pulling the .txt file.
I then formatted the SD Card, put the 1.2.8 firmware bin file back on the formatted card.
Next I put the SD Card with only the 1.2.8 on it back in the UAV, powered the UAV on, it made the upgrade sound again and I left it for 15 mins to do its thing. It got quiet after about 3 mins of starting it up but got quiet and I left it there to flash.
I then shut off the UAV, went outside and gave it a shot and bang! VPS is working properly and holding tight 2 feet off the ground. I then took it up high for a 16 min. Long distance flight and got none of the Ultrasonic Errors or anything I was getting before. Brought it back and VPS and UAV still stable.
Odd but it's fixed. 100% fixed and stable hover with no errors or instability!
@Michael Olsen
Upgraded Firmware to 1.2.8. I then saw the firmware upgrade to the UAV was a success by pulling the .txt file.
I then formatted the SD Card, put the 1.2.8 firmware bin file back on the formatted card.
Next I put the SD Card with only the 1.2.8 on it back in the UAV, powered the UAV on, it made the upgrade sound again and I left it for 15 mins to do its thing. It got quiet after about 3 mins of starting it up but got quiet and I left it there to flash.
I then shut off the UAV, went outside and gave it a shot and bang! VPS is working properly and holding tight 2 feet off the ground. I then took it up high for a 16 min. Long distance flight and got none of the Ultrasonic Errors or anything I was getting before. Brought it back and VPS and UAV still stable.
Odd but it's fixed. 100% fixed and stable hover with no errors or instability!
@Michael Olsen
Last edited: