- Joined
- Dec 8, 2012
- Messages
- 440
- Reaction score
- 18
[youtube]http://www.youtube.com/watch?v=4hStYq2vatM[/youtube]
A few notes:
-I removed the original pot with pliers, just rocked it back and forth until it came loose. It is thin metal.
-I rushed through this, but you have to use a metal saw to trim the metal shaft of the pentiometer down so it is flush with the transmitter.
-I ended up using a black sharpie marker to mark on the transmitter the straight down and straight horizontal views for the camera so I can easily refer to them while flying.
A few notes:
-I removed the original pot with pliers, just rocked it back and forth until it came loose. It is thin metal.
-I rushed through this, but you have to use a metal saw to trim the metal shaft of the pentiometer down so it is flush with the transmitter.
-I ended up using a black sharpie marker to mark on the transmitter the straight down and straight horizontal views for the camera so I can easily refer to them while flying.