- Joined
- Sep 4, 2013
- Messages
- 2,219
- Reaction score
- 7
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Very nice results! Will you be flying a gimbal or is this your final config?
I'm curious to see what your charger reports in mah returned. Also, what was the recovery rate? Were you also at ~11.1 on landing or did it bounce up a few tenths?
gen3benz said:First flight with the 5400mah G8 thunderpower.
(my fiance found my tp balance adapter cable!)
8" P1 props/nuts
FPV, gopro,iosd,v2 led, NO gimbal, shhhweet D3wey P2 battery door/LED mount/frame'ish
AUW 1123 grams
18mins 39secs
Landed after seeing the first red flashes....but went a bit too long. Especially for the first flight...
Voltage after 5 mins 11.07 :| 3.68 3.68 3.71
Not too happy about going over but with the 8" props i'm happy with the flight time.
This is pretty much chill flying as well, no big amp draws.
Should I adjust the first level protection, loaded to 11.0v?
Very nice results! Will you be flying a gimbal or is this your final config?
I'm curious to see what your charger reports in mah returned. Also, what was the recovery rate? Were you also at ~11.1 on landing or did it bounce up a few tenths?