Folks,
I originally posted this in the Litchi forum but now I am not so sure it is really a Litchi issue although it is manifesting itself on a Litchi waypoint mission. So as not to repeat everything I will include a link to that topic over there and would like to ask you guys to have a look at it to see if you can help me understand what's going on. I will include an exec summary here first:
I am flying waypoint mission to test out some POI heading issues. Yesterday I had a strange thing happen where I saw, part way into the mission, the status changed from F-WP to P-Atti and then back to F-WP (or F-GPS) and hovered in place. I was able to bring it back. I ran the mission this morning and it ran OK. Then I changed the mission to straight lines and reran it. THREE TIMES in almost the exact same spot, it switched into P-Atti mode and then F-GPS and hovered. I never lost signal. Two times seemed to be pretty must the same spot in space and the third was maybe 20 feet further on the path.
If you go over to the other topic I include links to healthy drones, a youtube video of my screen recording for two of those three runs as well as a collage of the three sections of the litchi csv showing the lat/lon of where it switched to P-Atti.
Under what conditions would this thing just switch to P-Atti mode??
Note that I have run this mission in the past and this never happened. Yesterday was the first time I ran it after adding DBS Itelite. But I can't imagine that it would be causing this to happen at the exact same spot 3 times in a row.
Here is the other thread,. Thanks in advance for any advice.
Very Disconcerting During Litchi Waypoint Mission
I originally posted this in the Litchi forum but now I am not so sure it is really a Litchi issue although it is manifesting itself on a Litchi waypoint mission. So as not to repeat everything I will include a link to that topic over there and would like to ask you guys to have a look at it to see if you can help me understand what's going on. I will include an exec summary here first:
I am flying waypoint mission to test out some POI heading issues. Yesterday I had a strange thing happen where I saw, part way into the mission, the status changed from F-WP to P-Atti and then back to F-WP (or F-GPS) and hovered in place. I was able to bring it back. I ran the mission this morning and it ran OK. Then I changed the mission to straight lines and reran it. THREE TIMES in almost the exact same spot, it switched into P-Atti mode and then F-GPS and hovered. I never lost signal. Two times seemed to be pretty must the same spot in space and the third was maybe 20 feet further on the path.
If you go over to the other topic I include links to healthy drones, a youtube video of my screen recording for two of those three runs as well as a collage of the three sections of the litchi csv showing the lat/lon of where it switched to P-Atti.
Under what conditions would this thing just switch to P-Atti mode??
Note that I have run this mission in the past and this never happened. Yesterday was the first time I ran it after adding DBS Itelite. But I can't imagine that it would be causing this to happen at the exact same spot 3 times in a row.
Here is the other thread,. Thanks in advance for any advice.
Very Disconcerting During Litchi Waypoint Mission