- Joined
- Jun 25, 2015
- Messages
- 592
- Reaction score
- 128
It is adjustable on the Professional. If it is set to automatic then the bitrate will go down from 10mbit to 2mbit gradually as your signal quality lowers due to distance or other factors.
Or you can in manual mode set it to 2mbit.
Range is no different between the two models only the quality of the video that is displayed on your device.
I am sorry but this is not correct. You cannot set the P3P to 2 Mbps. You can only set it between 4 and 10 Mbps. Moreover, there is no dynamic bandwidth adaptation when you fly further or when signal quality lowers. It just cuts out - try it. Download a recorded movie from your tablet (not from the SD) and open it on the computer: you will see the bitrate is fixed and does not change. That is also why DJI Go shows an estimated distance next to every bitrate.
The P3A is hardware set at 2 Mbps. See this huge thread about it Blurry Pixelation in outdoor settings with Phantom 3 Advanced - RC Groups