- Joined
- Jan 19, 2016
- Messages
- 4
- Reaction score
- 3
- Age
- 53
well dumb [EXPLETIVE REMOVED] me hooked up the p3a to a 6 foot rope and a hook and got some cool video of myself crashing in a tree after saving the 627stunt drone,
(video still uploading)
anyway the only apparent damage was a broken leg and a dented sonar on the bottom of the unit (no case cracks or such. ) oh yes 2 props.
well after survering the damage and popping the battery in that came out the unit would and does not link to the transmitter. i just get please attach drone and no comumunication to the rc . all lights seem to blink as they should and my more experienced drone friend suggested i update firmware , well i have been trying that and all i get is the long dreaded screech at the end of it and a fail in the log files. i am trying to decipher what the device missing means in the hidden log and hoped all you guys could help. wondering if my sonar/vision board is bad (i took it out and it looks good as does the ofdm board) but not sure what to do now. i was hoping to get it back in the air without sending it out as i am a experienced pc tech and this is no more troublesome than a macbook pro or hp as that goes. also i forgot to mention one of the ribbons came out of the camera gymbal and i pushed it back in. on power up the gymbal does it dances and seems to hold position when moving the quad. so i will attach all the log files from the 3 diff. fw. that are on dji site but other than that i cant find any diagnostic tools or anything.. also i have tried to rebind by holding the button and putting tablet in rc bind to no avail (red light on vision puck just blinks)
any help appreciated guys,, non powerball winner in cold vermont
anyway the only apparent damage was a broken leg and a dented sonar on the bottom of the unit (no case cracks or such. ) oh yes 2 props.
well after survering the damage and popping the battery in that came out the unit would and does not link to the transmitter. i just get please attach drone and no comumunication to the rc . all lights seem to blink as they should and my more experienced drone friend suggested i update firmware , well i have been trying that and all i get is the long dreaded screech at the end of it and a fail in the log files. i am trying to decipher what the device missing means in the hidden log and hoped all you guys could help. wondering if my sonar/vision board is bad (i took it out and it looks good as does the ofdm board) but not sure what to do now. i was hoping to get it back in the air without sending it out as i am a experienced pc tech and this is no more troublesome than a macbook pro or hp as that goes. also i forgot to mention one of the ribbons came out of the camera gymbal and i pushed it back in. on power up the gymbal does it dances and seems to hold position when moving the quad. so i will attach all the log files from the 3 diff. fw. that are on dji site but other than that i cant find any diagnostic tools or anything.. also i have tried to rebind by holding the button and putting tablet in rc bind to no avail (red light on vision puck just blinks)
any help appreciated guys,, non powerball winner in cold vermont
Attachments
Last edited by a moderator: