Yesterday after I did all the updates I lost the working of the 7th channel as many of you guys did too.
After these updates I reinstalled it through the software and it was working fine again.
The P2V was still connected by USB and TX was on during the test I did.
This morning I went out for a flight and noticed that the 7th channel wasn't working anymore :roll:
Back home I opened the software program again and I saw it was back to "Vision" mode.
I tried to put it back but every time that I power cycled the P2V , the working was gone too.
As long as you are connected to the PC and the remote control is powered on, it works.
Shut the TX and power cycle the P2V and the 7th channel isn't working anymore.
Thanks DJI !
So yesterday I confirmed that the 7th channel was working fine after the update and that there was no problem , I even made a short video to prove it.
I should have done more tests yesterday like shutting down everything and power up again, then I would have noticed that there was a problem.
I am really sorry for this incorrect information I gave about the 7th channel working.
I will try to figure out if there is a way to go around and will keep you informed if so.
Geert.