Hi There,
I came down in some bushes and was not able to get to the Phantom 2 Vision+ for around 5 mins. Luckily the bushes cushioned the fall and the camera and gimbal were not damaged but in the time it took me to get to the drone i did not stop the motors. The bushes stopped one of the props from turning and that engine heated up so much that it melted the shell mount and is now way off axis.
Has anyone had a similar experience or any ideas on how to fix this? I have had a look for Vision 2 Plus shells online and perhaps i'll just have to reassemble it in the new shell?
Maybe send it to DJI for repair? Now that the plastic has reset pushing or bending the motor on place does not seem like an option....
There are some images of the damage:
http://gcp.smugmug.com/Other/Phantom-2- ... p/n-r2mLW/
Everything else is working fine with the unit.
Any help or advise would be greatly appreciated.
Thanks so much
I came down in some bushes and was not able to get to the Phantom 2 Vision+ for around 5 mins. Luckily the bushes cushioned the fall and the camera and gimbal were not damaged but in the time it took me to get to the drone i did not stop the motors. The bushes stopped one of the props from turning and that engine heated up so much that it melted the shell mount and is now way off axis.
Has anyone had a similar experience or any ideas on how to fix this? I have had a look for Vision 2 Plus shells online and perhaps i'll just have to reassemble it in the new shell?
Maybe send it to DJI for repair? Now that the plastic has reset pushing or bending the motor on place does not seem like an option....
There are some images of the damage:
http://gcp.smugmug.com/Other/Phantom-2- ... p/n-r2mLW/
Everything else is working fine with the unit.
Any help or advise would be greatly appreciated.
Thanks so much