- Joined
- Apr 23, 2014
- Messages
- 13
- Reaction score
- 0
Re: How to fix a vibrating / shaking / crazy P2V+ camera gim
Ah that explains. Sorry. I'm going back to my screwdriver.
Ah that explains. Sorry. I'm going back to my screwdriver.
dezunka said:npalen - my ribbon cable wasn't wrapped around the shaft. It was folded back on itself and tucked into the cover. I just moved it enough to get to the screw. Be careful pulling out the ribbon cable from the motor. It actually has a very small lever that holds it in place. You really need to unscrew the motor and pull the circuit board away from the housing to properly remove the ribbon cable. You need to lift the lever to release the cable and you need to press the lever back down once you reinsert the ribbon cable. (The lever is shown with the red arrow in my photo).