Separately: Using the DJI Go app or using Litchi - how accurate will the P4 navigate a line? And I'll start simple. I need to have the drone fly a straight line; from here to there -- the complications? a) it's only 20 feet between tall towers that will fark up the drone and b) there is Always wind, not super strong or often gusting - but it can be. I've tried flying it manually but a) if OA is on it will stop randomly and go really slow as it's picking up the towers on both sides or b) with OA off it goes fast but the wind pushes me side to side and makes me quite nervous doing this manually, quickly. I can do it slow and herky jerky but I need a nice smooth fluid shoot. I need to swoop down from about 50 feet high, to in between the row of 5 on a side 30 foot tall towers, going lower as I reach the end and at the end are two towers attached to an awning where the drone should stop and hover to let the shot complete.
So, using DJI Go? How would you do this? And, will it be accurate enough? Just need point A-to-B without pause or left/right drifting. I'll attach a photo of the path I need to fly down ... and end up at the far end. Looks brain dead simple, but the winds had me side to side way too close...
So, using DJI Go? How would you do this? And, will it be accurate enough? Just need point A-to-B without pause or left/right drifting. I'll attach a photo of the path I need to fly down ... and end up at the far end. Looks brain dead simple, but the winds had me side to side way too close...
Attachments
Last edited: