- Joined
- May 20, 2014
- Messages
- 2
- Reaction score
- 0
Hello guys, i'm new at this forum and my first question is a zenmuse h3-3d could be added in a Phantom 1?
David Weber said:Hello guys, i'm new at this forum and my first question is a zenmuse h3-3d could be added in a Phantom 1?
ElGuano said:Yes, this will be possible. There's a "Phantom 1" mounting kit for the H3-3D that includes a bracket and longer landing gear, and an H3-3D sku that includes the GCU needed to work with the P1 (you would still need to add a PMU-V2 for CANBus).
There are reports that the H3-3D works fine with the H3-2D GCU or with the Phantom 1 upgrade board, but those are probably unsupported configurations and YMMV/caveat emptor etc.
OI Photography said:My H3-3D is on the way now, once it arrives I'll be able confirm whether it works with the P1 upgrade board in place of the GCU.
davemcm said:OI Photography said:My H3-3D is on the way now, once it arrives I'll be able confirm whether it works with the P1 upgrade board in place of the GCU.
Do you have the Phantom 1 mounting plate?
I'm about to order mine now for delivery tommorow, but still can't get the mounting plate for Phantom 1 instock anywhere.
http://www.quadcopters.co.uk/h3-3d-moun ... 1426-p.asp
H3-3D Mounting Adapter for Phantom 1 Part 49
ElGuano said:There are reports that the H3-3D works fine with the H3-2D GCU or with the Phantom 1 upgrade board, but those are probably unsupported configurations and YMMV/caveat emptor etc.
PJA said:OI... Where did you order the H3-3D... 1uas.com?
legrandphoto said:Have you done any further tests with the upgrade board equipped Phantom 1 and the H3-3D? I am thinking of doing this same upgrade.
Thanks
michael
Danielhv said:where are you guys mounting the anti interference board at? I have a phantom 1.5, and can't seem to find a decent place to mount it.
OI Photography said:Danielhv said:where are you guys mounting the anti interference board at? I have a phantom 1.5, and can't seem to find a decent place to mount it.
I just did without it, since it made no noticeable difference when I tested. I had planned to find a place internally for it since I still have plenty of room in there.
FredMurtz said:I want to install the Zenmus HD-3D gimbal on my 1.0. I see where to get the gimbal, where would I get the upgrade board? Thanks.