Well low and behold your are correct. Now how did that happen. I didn't change the setting. So I try to set it back to NTSC and at first it blinks, but nothing. Try again and the setting changes and the app goes dark with the DJI logo, comes back to camera view and I have 1080p @ 60 again! Thanks! Who knew. But the story does not end. Looking at the specifications I have everything back except no 25 or 50 fps are now gone in any/all settings. Either 4K has no 25' 1080p is missing 25 & 50 as is the 720p setting. Ok. It a bit better bit not everything.
So to check it. I restart everything from the beginning. Power on remote, power on drone and low and behold it switched itself back to PAL. I am not making this up. So I reset again, restart again, same result. No now I go to reset all camera settings back to default and NTSC is selected. I restart and this time it sticks and NTSC is select as it should. But I am still missing the other fps choices as stated above. Of note, while flying today, the camera settings would no let me select the 1080p 50 fps choice I had from the 24 fps it was set at. But it would let me select 48 which is what I shot my project on today. This is really weird. I sure it is a software issue but I really don't know what's going on or what else to do. I would like to be able to use all the camera settings that are supposed to be there.
Oh and thanks for your help. I don't know how you knew that but you were right. Thank you.