Nervous? Doesn't quite fit the bill. Took mine out of the box, put everything together, started it up and then checked everything out with the props off. This was in September and we were heading out for vacation, everything worked perfect. We left and I put it away for a couple days. Next, while on the road, I updated it to 1.3.2 and then on to 1.4.1. The battery was in, the props were on, I was ready to fly for the first time with everything up to 1.4.1... The camera wasn't working and it said "No Signal" on the tablet... So I had a black tablet and took off anyway, it was flying ok, I just didn't have a camera. Then It lost signal and went into RTH and I was maybe 30 feet away and 20' off of the ground... I had already practiced with a cheap drone and knew better then to bother with beginner mode, so I thru it into atti and brought it down. I came on here again and had been watching for months before I was ready to buy and had been asking questions. So I had 1.3.2 on the 16g card that came with the drone and downgraded everything back to 1.3.2 the next day. And everything worked great, the first actual 100% working flight went great and I got some wonderful footage for the first time... Or I would have if I had remembered to turn on the camera
So for a couple days with problems, I felt really alone, Nervous? Nahh... I was a pucker'ín hard. When I finally got it in the air, I got the Phantom 3 Feeling Good Buzz for the first time and fell in love. It's been 4 months and I have a ton of footage and movies to finish