Nothing but problems here. I get a poor signal rating at start up it won't let me take off without a battery firmware update. I made a huge mistake in updating 1.32 works fine I should have never messed with it. Hopefully Amazon will let me return it. So I can start over.
If i flew 4-10 miles on my first battery i would have reported everythings fine! I didnt see a prob til my 2nd flightHas anything else changed in your setup? it appears that you posted on Thursday that you flew 4 miles out at 171ft with this firmware (1.5.3) and said everything was fine.
What firmware is on your long range bird?Nothing but problems here. I get a poor signal rating at start up it won't let me take off without a battery firmware update. I made a huge mistake in updating 1.32 works fine I should have never messed with it. Hopefully Amazon will let me return it. So I can start over.
Try to re-link RC with your P3.Nothing but problems here. I get a poor signal rating at start up it won't let me take off without a battery firmware update. I made a huge mistake in updating 1.32 works fine I should have never messed with it. Hopefully Amazon will let me return it. So I can start over.
What firmware is on your long range bird?
Make checking RTH altitude every time before you fly as a part of your regular check list.I have six flights so far with this version of a/c firmware and all is well. No video or stability issues. Maybe I missed this somewhere but I found the RTH altitude had been reset back to 30m. Not sure if the a/c update reset that or the controller update did. I'll remember to check that next time. Could have got into trouble if RTH had kicked in. Big lesson learned for me.