I opened a topic in DJ forums.Please respond there people.I'm the only one that I'm posting and they think I do something wrong and keep asking the same questions....
Extreme Go App lag in P3s
Extreme Go App lag in P3s
I opened a topic in DJ forums.Please respond there people.I'm the only one that I'm posting and they think I do something wrong and keep asking the same questions....
Extreme Go App lag in P3s
Post it in the Dj forums my friend!I made a video too.
With manual controls it works ok,so the RC is binded correctly.When I hit the auto take-off the problem starts.
So guys based on some research I did last night - it would appear that with the latest firmware release, DJI has done changes to reduce the range of the CE birds to comply with regulations. According to an email from DJI to a customer, official range has now come in to 300 meters. Whether this is true or not who knows, but they have obviously done something.
So this gives more questions than answers, because according to the documentation, all Phantom's are shipped with FCC config, but then switch to CE depending on the GPS location of the bird. So even with the FCC mod (e.g. Papatitas), perhaps the firmware overrides, which is 1.6.8 seems to be screwing so many people over? Also 1.6.8 for the Phantom 3S is likely the last firmware version to be released (saw that on DJI forums).
In any case I'm still in a bind. 1.5.7 with FCC mod, DJI go app unusable if I wanna actually record video or take pictures. Litchi range is 1/2 that of DJI Go app, but recording works fine. Also had RTH issue with Litchi where it was almost 300m from me and wouldn't RTH.
Getting a bit tired of all this fking around, it's starting to become more trouble than it's worth..
Not Happy!
I don't know if i can help anyone with this but I run firmware 1.5.7 and I refuse to update because I don't want to risk the problems i hear with 1.6.8. I fly perfectly with my current version. My phone automatically installed 3.0 and i got this lag problem. followed a downgrade tutorial for apple here: How to downgrade to any DJI GO App version
I am flying happy back on 2.9.2
Thanks for sharing! I'll try it tonight and let you guys know how it goes...
Can you tell me are you using the FCC mod as well? Are you in CE country? What sort of range are you getting? (assuming your using a P3S)
I will try it too.....because Dji support emailed me and asked me to send the drone in because it's a drone problem.
I asked them how they came into this conclusion because the drone worked great with 2.9.2
I really don't know what to say.
Is it an easy thing to do in the video above?I'm a brand new daddy and no time for reading!
In doing a roll back today, my range is terrible with 1.6.8 and 3.0.0, 80m tops in built up area
Sent from my iPhone using Tapatalk