Ok, I got a chinese 2 axis simple bgc gimble to put on my Phanton 2 Vision. I'm just not sure how to hook it all up with no directions. I searched youtube for videos but no one seems to have one like mine.
So my first question is from the gimble there is a wire hanging off of it with a plug. The wires are black and red. I am pretty sure this is the power. I don't have any ports to plug this into anywhere that I see, so I'm guessing I need to solder an opposite plug to the main power on the vision, then run it down the leg and connect the two plugs together. This is all a guess and if this is what I'm supposed to do, where would I find the plug for the other end? What is the type of plug called? Or if there is a better way to do it, i'm open for it.
After that, I know I need to run one of the two cables from F2 on the naza in the vision down to the gimble. I'm just not sure on which prongs on the gimble. Now one of the two cords only has 2 wires going all the way through. The other cord has all 3 going through. I saw some videos say I only need one prong covered and not all three. I'm guessing it goes all the way on the right and I only need the one cable that has three wires in it. Again, I'm just guessing.
Hope someone can steer me the right direction. I just want to confirm with someone before I try it. I'd hate to ruin anything. Thanks again for the help. I've posted pictures in an album so you can see the parts I am referring to. Thanks for the help.
Jeff
So my first question is from the gimble there is a wire hanging off of it with a plug. The wires are black and red. I am pretty sure this is the power. I don't have any ports to plug this into anywhere that I see, so I'm guessing I need to solder an opposite plug to the main power on the vision, then run it down the leg and connect the two plugs together. This is all a guess and if this is what I'm supposed to do, where would I find the plug for the other end? What is the type of plug called? Or if there is a better way to do it, i'm open for it.
After that, I know I need to run one of the two cables from F2 on the naza in the vision down to the gimble. I'm just not sure on which prongs on the gimble. Now one of the two cords only has 2 wires going all the way through. The other cord has all 3 going through. I saw some videos say I only need one prong covered and not all three. I'm guessing it goes all the way on the right and I only need the one cable that has three wires in it. Again, I'm just guessing.
Hope someone can steer me the right direction. I just want to confirm with someone before I try it. I'd hate to ruin anything. Thanks again for the help. I've posted pictures in an album so you can see the parts I am referring to. Thanks for the help.
Jeff