Okay so today I replaced my receiver because transmitter would not bind. Now the transmitter seems to bind (red light on receiver goes off when I turn transmitter on) & (red light on receiver turns on when transmitter is turned off) but the yellow lights continue to blink on phantom. But when I attempt to start the motors there is nothing. I hooked my phantom up to the PT2 assistant and the system doesn't recognize when I move the sticks. The RC assistant recognizes the movement though. The only error message I get is Error 27 which is compass calibration. I used the IMU calibration but I still have irregular compass numbers. I cannot manually calibrate until my transmitter is working with the phantom. Please help
Sent from my iPhone using PhantomPilots mobile app
Sent from my iPhone using PhantomPilots mobile app