Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Removal of phantom2vision plus MotherBoard

Discussion in 'Phantom 2 Vision + Discussion' started by Philg51, Jan 21, 2015.

  1. Philg51

    Joined:
    Jan 21, 2015
    Messages:
    1
    Likes Received:
    0
    I want to fit a new shell to my dinged up P2v+.
    Have stripped down to motherboard but now stuck.
    One motherboard fixing screw is located under the gold transmitter module.
    How do I get at this?
    Looks like the tx unit needs removal but no obvious screws? Is it double sided taped to the motherboard and how easy is it to force free? :ugeek:

    Thanks
     
  2. CityZen

    Joined:
    Oct 22, 2014
    Messages:
    940
    Likes Received:
    36
    Location:
    NYC
    You need to lift the wifi module. Remove the one screw on its bracket first, then apply firm but continuous lifting pressure on that side. The box may not budge for a while, but just keep applying pressure. Eventually, it will start to give. Keep up the slow steady pressure (be very patient) and it will lift off cleanly.

    You don't need to remove any wires for this.