Hello.
I have an H3-3D gimbal which works well on a Phantom when connected to the Zenmuse connector.
I wanted to attempt to make it transferable to my NAZA M v2 controlled Hexa.
I have a spare, DJI CANBUS connectors, and do not want to purchase the H3-3D GPU
(do not intend paying 100.- , when it is given 'for free' with the purchase of the H3-3D Naza Version,
...at the same price)
Anything I need to know before interfacing the GND, CANBUS +ve and -ve,
from my H3-3D Phantom version to the Naza M V2 PMU ?
I've tried scoping for the signal waveform levels on both the Zenmuse Bus on the Phantom, and also the CANBUS signals out of the NAZA PMU. They are different.
My Questions are:
1. Is there need for a CAN level translator
2. Are the protocols of the CANBUS coming out of the zenmuse SMD socket on the Phantom2 , different from the CANBUS protocols coming out from the NAZA M v2 PMU ?
I have an H3-3D gimbal which works well on a Phantom when connected to the Zenmuse connector.
I wanted to attempt to make it transferable to my NAZA M v2 controlled Hexa.
I have a spare, DJI CANBUS connectors, and do not want to purchase the H3-3D GPU
(do not intend paying 100.- , when it is given 'for free' with the purchase of the H3-3D Naza Version,
...at the same price)
Anything I need to know before interfacing the GND, CANBUS +ve and -ve,
from my H3-3D Phantom version to the Naza M V2 PMU ?
I've tried scoping for the signal waveform levels on both the Zenmuse Bus on the Phantom, and also the CANBUS signals out of the NAZA PMU. They are different.
My Questions are:
1. Is there need for a CAN level translator
2. Are the protocols of the CANBUS coming out of the zenmuse SMD socket on the Phantom2 , different from the CANBUS protocols coming out from the NAZA M v2 PMU ?