Well the tests I did yesterday did not get me anywhere, everything looks good in the remote. Decided not to mess with the connector from the antenna that goes into the TX board since it looked good and was glued in place. I really wanted to pull it and try my other remote antenna on it. I don't even know if it is the same. Testing the Phantom at about 80' ?. I could easily throw a rock that far.
It set it up tied it down with a string in case it took off, the antenna on the remote seem to have the best signal at 90 degrees to my left. But watching the signals levels it just keeps jumping way to much.
I can have full signal on DJI GO, move my hand behind the remote and displays "weak remote controller", "lost remote controller".
I had no problem in removing the crimp, I removed some of the silicone paste, and it popped straight off. I'm contemplating buying a replacement antenna and replacing my damaged one.
Would it be as straight forward as that?