P3A New camera to be installed.

[Jefito]

Hi, I had an accident with my bird and the camera was destroyed. Fortunately no other damages in the drone. I have just ordered a new camera and I would like to know the steps to be followed for its installation. Is only to connect and that's all or should I reinstall the FW? Thanks and regards


Sent from my iPhone using PhantomPilots

 

[msinger]

Here's a video showing how to replace the camera/gimbal:

If you need to update the firmware, you'll see a prompt in DJI GO.

 

[Jefito]

Great ! Thanks a lot msinger


Sent from my iPhone using PhantomPilots

 

[DanMan32]

Do a gimbal recalibration and only use two anti drop pins. Make sure the pins are able to move freely. If not, pull down on the retaining ring until it sits in the stop groove and can't move further down the pin.
It is possible to remove those pins without having to break them, there's a trick to it taking advantage of plastic fatigue.

Sent from my HTC 10 using PhantomPilots mobile app