- Joined
- Feb 15, 2016
- Messages
- 28
- Reaction score
- 1
- Age
- 78
My p3a was working perfectly before I decided to upgrade with new firmware 1.9 .60 after downloading to the aircraft, it would not connect to the controller. So I was told by DJI that I needed to down load or go back to the old firmware that it was on or to upgrade to only 1.8.8 or whatever that number was so I did and it still won't work so they told me to update my controller with 1.6 of which I can't find or 1.4 of which I can't find and I and I put it back to 1.3 and it still won't work so I'm a little frustrated. I guess there's no way of telling which firmware was in the controller when I got it because it doesn't tell you anywhere on the DJI Go app.
DJI told me 2 Link the controller by pushing on the link button on the aircraft so I went through that procedure and it still doesn't work the controller says it's linked but the aircraft still blinks red and it won't work
I'm sure this reads as frustrated as I am sorry about that does anyone have any suggestions. Thanks
DJI told me 2 Link the controller by pushing on the link button on the aircraft so I went through that procedure and it still doesn't work the controller says it's linked but the aircraft still blinks red and it won't work
I'm sure this reads as frustrated as I am sorry about that does anyone have any suggestions. Thanks