This was my first post when I was just having RPM problems:
OK three hours on this one and I'm tapping out! Any help would be appreciated. YouTube only shows props on backwards and top cover installed sideways which is not the case here. This bird has never flown yet. All updates and calibrations have been completed twice. It is in Naza-m mode to enable the IOC. I had this FPV system on another P2 and it worked all fine. Everything has checked out. Bugs worked out of the gimbal. The gains have not been messed with. The distance limits have been messed with and placed in miles with a 2 mile ceiling and 3000K mile circumference of operation. (To stop a wrong GPS fix on start up "Glitch" To cause it to take off wide open not coming back(Fly away) as it's trying to go into where it thinks it's home range is which is what happened to me before) Compass cut off the old leg and placed on a wider taller set of landing gear.
Powers up all vitals show good on the iosd-mini, but it comes up just above an idle on full power. Almost lifts off but does not. Am I missing a calibration somewhere?
Thanks in advance.
Jeffro from Illinois
Phantom 2 v2.0
Black Pearl 7 ch
600mw Immersion
Fat shark Spiro's + long distance directional
Dimuse 3d Gimbal
Gopro3+
http://s298.photobucket.com/user/mccue7 ... ow/Phantom
OK three hours on this one and I'm tapping out! Any help would be appreciated. YouTube only shows props on backwards and top cover installed sideways which is not the case here. This bird has never flown yet. All updates and calibrations have been completed twice. It is in Naza-m mode to enable the IOC. I had this FPV system on another P2 and it worked all fine. Everything has checked out. Bugs worked out of the gimbal. The gains have not been messed with. The distance limits have been messed with and placed in miles with a 2 mile ceiling and 3000K mile circumference of operation. (To stop a wrong GPS fix on start up "Glitch" To cause it to take off wide open not coming back(Fly away) as it's trying to go into where it thinks it's home range is which is what happened to me before) Compass cut off the old leg and placed on a wider taller set of landing gear.
Powers up all vitals show good on the iosd-mini, but it comes up just above an idle on full power. Almost lifts off but does not. Am I missing a calibration somewhere?
Thanks in advance.
Jeffro from Illinois
Phantom 2 v2.0
Black Pearl 7 ch
600mw Immersion
Fat shark Spiro's + long distance directional
Dimuse 3d Gimbal
Gopro3+
http://s298.photobucket.com/user/mccue7 ... ow/Phantom