I am a begginer starting from zero in the let´s say "Drone world"
I need help to troubleshoot the problems I have with my Phantom1.
I know nothing about this kind of stuff and my experience is only with old kind radio controled devices.
Instead of a ready to fly I choose a kit like drone that needs care fom start.
I am learning day by day because the model I choose does not works and i have to search for info.
I can not fly it with different sinthoms and troubles. flashing red led like battery voltage fail or other malfunction.
I tried to enter into the programming of the Naza to see what was programmed inside and to check if any parameter shows me were the problem is.
I installed the DJI NAZA asistant software, two of them the version 2.X or something and the lite version and of course the driver for the computer.
I can not communicate with the Phantom. the program does not communicate at all.
I connected the usb cable directly to the computer without success, so I suppose the cable is not the problem unless the usb is disconnected inside the NAZA. I do not want to open de drone to check it.
I registered in a DJI screen that appeared when downloading the soft. the program ask for a serial number longer than the Drone itself. I can not find the serial number and thereis a limited number of tries to fill.
I do not know what to do. I am stuck on this.
I do not know if the previous owner made a programming of the cpu and it needs a different software to communicate.
Please, help.....¡
Thanks for your help.
I edited to include data of the device : it is a P330D version 1.1.1 but I have been told it was modified to 1.1.2 ?¿ Windows XP.
I need help to troubleshoot the problems I have with my Phantom1.
I know nothing about this kind of stuff and my experience is only with old kind radio controled devices.
Instead of a ready to fly I choose a kit like drone that needs care fom start.
I am learning day by day because the model I choose does not works and i have to search for info.
I can not fly it with different sinthoms and troubles. flashing red led like battery voltage fail or other malfunction.
I tried to enter into the programming of the Naza to see what was programmed inside and to check if any parameter shows me were the problem is.
I installed the DJI NAZA asistant software, two of them the version 2.X or something and the lite version and of course the driver for the computer.
I can not communicate with the Phantom. the program does not communicate at all.
I connected the usb cable directly to the computer without success, so I suppose the cable is not the problem unless the usb is disconnected inside the NAZA. I do not want to open de drone to check it.
I registered in a DJI screen that appeared when downloading the soft. the program ask for a serial number longer than the Drone itself. I can not find the serial number and thereis a limited number of tries to fill.
I do not know what to do. I am stuck on this.
I do not know if the previous owner made a programming of the cpu and it needs a different software to communicate.
Please, help.....¡
Thanks for your help.
I edited to include data of the device : it is a P330D version 1.1.1 but I have been told it was modified to 1.1.2 ?¿ Windows XP.
Last edited: