- Joined
- May 24, 2014
- Messages
- 12
- Reaction score
- 0
Just upgraded the firmware to 1.0.0.6, and now the gimbal has started doing this:
[youtube]http://www.youtube.com/watch?v=ZmUTOY8F87M[/youtube]
After the horizontal "waggle", it now twitches a few times as if it is hitting a hard stop, and then it drifts in the yaw axis to the left or right. Any ideas what's happening? I've removed the plastics pins, and I've also clearanced the battery because those were both issues with mine. Nothing is physicaly interfering with the yaw axis anymore.
I have calibrated the IMU (needed to do it on a PC, as it wouldn't calibrate using the Mac software), but it didn't change.
I will add that, if I pick up the phantom and move it around, it seems to find "centre" and gets rid of the drift. It's more the "hard stop twitch" that has me worried.
Thanks!
W
[youtube]http://www.youtube.com/watch?v=ZmUTOY8F87M[/youtube]
After the horizontal "waggle", it now twitches a few times as if it is hitting a hard stop, and then it drifts in the yaw axis to the left or right. Any ideas what's happening? I've removed the plastics pins, and I've also clearanced the battery because those were both issues with mine. Nothing is physicaly interfering with the yaw axis anymore.
I have calibrated the IMU (needed to do it on a PC, as it wouldn't calibrate using the Mac software), but it didn't change.
I will add that, if I pick up the phantom and move it around, it seems to find "centre" and gets rid of the drift. It's more the "hard stop twitch" that has me worried.
Thanks!
W