Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

FREE FC200 Gimbal availible !

Discussion in 'Phantom 2 Vision Discussion' started by TheFlyingSentinel, Mar 24, 2014.

  1. TheFlyingSentinel

    Joined:
    Dec 10, 2013
    Messages:
    33
    Likes Received:
    2
  2. Pull_Up

    Joined:
    Nov 5, 2013
    Messages:
    3,684
    Likes Received:
    48
    Location:
    South Oxfordshire, UK
    Thanks for spamming every other thread, and now one of it's own... :roll:

    I'm not fully clued up on 3D printing, but when you say "free" you just mean the plastic frame and camera mount - unless you've got a way of printing out gimbal brushless motors, a control board with flashed firmware, wiring and connectors then you haven't got a gimbal for free really... ;)
     
  3. TheFlyingSentinel

    Joined:
    Dec 10, 2013
    Messages:
    33
    Likes Received:
    2
    Hey ... yes ... I posted this in the forum at about 3 threads ... reason is I was looking since a while for an good shape scan of the FC200 cam. Only Rotorpixel had a good one and this was petty expensive ...

    with free I mean almost free ... sorry ... 40 bugs for the controller and the motors ... the expensive things on the commercial parts are the special shapes used to hold the FC200 save ...
     
  4. Amra

    Joined:
    Sep 26, 2013
    Messages:
    60
    Likes Received:
    0
    Wish I knew someone with a 3D printer...
     
  5. AllanVB

    Joined:
    Jan 16, 2014
    Messages:
    394
    Likes Received:
    0
    Location:
    Oregon, USA
    There are online companies that will print this for you. about $25 + shipping for the vision holder. About $100 for all. :)
     
  6. mrorange26

    Joined:
    Nov 29, 2014
    Messages:
    35
    Likes Received:
    0
    Can you make it tilt like the original gimbal.
     
  7. Fredric Bjorklund

    Joined:
    Apr 5, 2015
    Messages:
    6
    Likes Received:
    1
    If I could get one of these for free for my one month old P2V, I would be blown away! My name is Fred, live in Indiana U.S.A., email is bjorklund_fred@yahoo.com.
     
  8. IflyinWY

    Joined:
    Sep 12, 2014
    Messages:
    3,470
    Likes Received:
    939
    Location:
    Where the deer and the antelope play
    Is this really a spammer? I know a guy.
     
  9. bomber1712

    Joined:
    Nov 14, 2014
    Messages:
    21
    Likes Received:
    2
    OK, so I am wondering.....Can anyone point me to a step-by-step, part by part sequence? How do I put this together with the motors and wires, etc? How do I make it work with my P2V controller or app? I have a friend with a 3D printer and I am going to have him make this. Just don't know what to do with it once I have the plastic parts! :)