You should be able to get the RC FW version simply by looking in the app once you have a mobile device connected. Make a note of it.Is it possible to aquire firmware version on my Pro3 drone and controller without linking?
Keep in mind that any P3P which has not been used in years has a good chance of still flying but also a good chance of no longer transmitting a video image to the RC for you to view on your mobile device.This package has not been used years, just trying to recover it.
FYI that you dont need to know the FW versions to link, but it is true that linking may be difficult or not possible if you have some sort of FW mismatch between AC and RC.It does not fly. I would to link Bird and Controller to maybe get bird to fly I just want to locate version of FW so I can link the two together.
Hey weanuts before doing or changing anything try this set your drone in an open area grab a chair leave the blades off put a fresh battery in if it's hot out wait till it gets cooler. Hook up phone to controller with cord.I would love to know what "Debug" file is, and when to use it. Is it possible to "Format card where firmware is installed (on bird)? Phil2, I appreciate your reply. This package has not been used years, just trying to recover it.
If you post the flight data from your last flight, the firmware version will be hidden inside with a hundred other things.It does not fly. I would to link Bird and Controller to maybe get bird to fly I just want to locate version of FW so I can link the two together.
I'm about to start my P3S and P4 up after hibernating for 3 years. Should be fine (blades off ;-) )Hey weanuts before doing or changing anything try this set your drone in an open area grab a chair leave the blades off put a fresh battery in if it's hot out wait till it gets cooler. Hook up phone to controller with cord.
Turn on controller and hopefully the phone notices the Dji app starting up
Turn on the drone.
See if the app picks the drone that u have and continues to start up. And it didn't.
Ok do it all over again. Turn every thing off and start it up again and again and again it took mine like 8 to 12 times turning it off and on.
Mine sat in my case for like two years without it being started. It's worth a try before you start changing ****.
The plus means that the batteries or something is not updated to the current version. Won’t hurt anything.Update:
I can now link AC to RC. Firmware in AC is 1.7.60+
My new question is does it matter if the "+" is present, and if it is a concern, how do I remove the "+" ?
Appreciated, thanks
The plus means that the batteries or something is not updated to the current version. Won’t hurt anything.
Sounds good to hear you linked at last.Update:
I can now link AC to RC. Firmware in AC is 1.7.60+
My new question is does it matter if the "+" is present, and if it is a concern, how do I remove the "+" ?
Appreciated, thanks