How much for you to put it in a envelope with a regular stamp and ship it to me I'm in Michigani do
How much for you to put it in a envelope with a regular stamp and ship it to me I'm in Michigani do
Sorry but it's only 4.99 on eBay shipped but if you can match it I rather keep the money in this group there is way cheaper envelopes You can put it in I just ordered the replacement feet pads and that was 1.99 shipped let me know because I want to water today thanksi can't put it in the envelope and ship it, i tried that with small pieces and had some issues because usps puts the envelopes through some sort of machine
and in most cases i get them back so i will have to put it in the envelope and then in the usps priority envelope which will cost about $7 ($6.85 i think).
so if $15 sounds good to you i will do that.
i do not have a spare P3P gimbal board buy yes you are correct, that is a crystal that broke, in most crashes they brake off or just snap in half.Hi hunch!
I don't know if this is the right place to post this, but I am trying to fix my gimbal (P3 4k - not pro or adv) and I see that the PCB at the top where the yaw shaft goes through has a long device that looks like a resistor that is smashed.
The same one that is being discussed in this thread: Phantom 3 pro gimbal photo
If this is unreasonable - do you have that board to sell or know someone who might?
Thanks and sorry if this post was in the wrong thread.
Have a nice one,
R
Update: I am pretty sure I have identified the component to be an Epson MC-146 which is a 32.768kHz Crystal and not a resistor. I will order some but I am still interested in purchasing the board because I will likely ruin mine instead of fixing it because dont have a rework station.
i do not have a spare P3P gimbal board buy yes you are correct, that is a crystal that broke, in most crashes they brake off or just snap in half.
you will need some serious micro solder in order to solder that back on. i've done a few but with a $600 micro solder... on a good day
good luck.
sorry i couldn't have been of more help.
Hi looking for a wi fi module for pv2 plus.thanksA LOT OF PARTS AVAILABLE,
I am cleaning out the shop so a lot of parts are available for P2 and P3 Phantoms.
let me know what you are looking for.
P2 parts:
ESCs, motors, NAZA controllers, gimbal parts like main boards, yaw arms, roll arms,...
controllers, 5.8Ghz and 2.4Ghz, RE700s,...
P3 parts:
motors, LED covers, gimbal parts like yaw arms, motors, roll arms,
controllers, B and C models,...
OR if someone is interested in a whole LOT let me know.
I would actually prefer packing it all up and sending to one location.