44 flights without a hitch. Great performance, great video, great range 2500' even with trees not a flicker with video. Only concern has been battery temp. Seems way too hot to be in such close proximity to all those gadget thingies.
After 2 flawless flights last night I update the firmware. Go out to fly this morning tells me I need to update RC. Update RC go to fly and will not connect. Recalibrated IMU and the gimbal as it's now a little left of center and tilting to the right. The gimbal did not correct after running auto calibrate. However the bird did connect without a problem. Took off after pre-flight and compass calibration. Hovered at about 12 feet. Prior to update hovering was crazy steady, wouldn't budge more than an inch or two if that. Now it drifts 8-16 inches in both directions and altitude will change slightly. Not bad just noting difference. Flew about 10 minutes and everything went well. Went out to fly this evening, took 30 minutes of every combination of stops and start sequences you can imagine. Finally got connected and went flying. Flew about 10 minutes then at 230' altitude and distance of just under 600' video starts breaking up and refresh rate on the screen drags. Absolute line of sight. Open field. No obstructions. All the way back and hovering at 20' at a distance of 14 feet no solid video.
I don't know the App, Ipad
mini 2, RFI, improper alignment of the stars?