Ok so I did have a very bad crash the other day. The bird flew at full speed at a large metal object......think the compass was affected. So instead of crashing full speed into this object (water tower) I decided to kill the motors and let her come down from about 10 feet. well it flipped over and landed on the top ejecting the camera. I found all the pieces and ordered a replacement cable. Now I installed the cable, which came with a small bend in it from shipping, and did an IMU calibration. However the camera now powers up and moves to the right and then stays there. There is resistance from side to side but up and down there is none. The red light on the camera blinks red too.
Anyone have any idea what is going on? I tried making sure all the cable connections were good and did several IMU calibrations. Is it possible that the flex cable I have is bad? Please help I have several jobs that require my bird. Thanks
Anyone have any idea what is going on? I tried making sure all the cable connections were good and did several IMU calibrations. Is it possible that the flex cable I have is bad? Please help I have several jobs that require my bird. Thanks