Any tips?
All is working nice and picture is coming nicely and motors starts, no gimbal power.
Jani
All is working nice and picture is coming nicely and motors starts, no gimbal power.
Jani
Welcome. Thinking about this a bit more, there are many cables as well between the main unit and the camera assembly. I would start with the 'easier' cables first and check that all connectors are well seated, BEFORE moving on to the more sensitive cables (e.g. flat ribbon).
If none of the gimbal motors are moving, then it's most likely happening somewhere between the main board (inside the drone) and the cable powering the gimbal. I would start there first. Good Luck.