gimbal

Hello all! I just purchased a used phantom three standard on eBay. The seller did say that it was used and the gimbal mount that connects to the body shell was brocken. And the pictures did show that the mount was broken. You could see that the gray 8 pin wiring harness had come loose. It did...

Hi all, I've attached a short video of what it does on start up and also some pics. Only the main white cable can be connected. So after crashing into a tree this is what I have. The golden u.fl connectors are detached and the flexible flat cable has a crack in it. I think the crazy dancing is...

P3A upgraded the firmware to 1.10.009 failed then aborted because it said it was already on there. Wierd, but DJI said thats ok. Now when i fly, the horizon is at an angle and the straight down view is all jittery. I have recalibrated the gimble, twice and Imu checked, compass calibration...

I am having problems with the camera gimbal on the 3 pro. I had a crash that broke the base plate. I replaced the plate and all the cushion balls, but the camera controls are not working. I can run the calibration when it is cold and I get the twisting and turning on start up, but after a while...

Hi! I have been flying a Phantom 3 Professional now for 2 months and I have noticed that the Gimbal sometimes gets pushed down and sideways at high speed. I have a clip on youtube that will illustrate the problem. Does anyone have any advice on how to get around this problem or is it a...

This might be a weird question but does anyone know what the Phantom 4 Pro gimbal is made of?

I have a new P3A and the vertical/pitch gimbal tilt is not responding to the touch pad indicator on the DJI GO app. I can move the gimbal from 90 degrees to 180 degrees with the C2 control but when I swipe down on the control ledger on the right side of the screen, the gimbal doesn't move. I...

This is the one I am talking about.

Dear Pilots, I am new to this forum and I hope that my concern is well accepted here :) Yesterday I flew my Phantom II with the 3D/H4 gimbal - all quite well after the first tries. Today I read about the problems, if you use the GoPro Capture App as your FPV-Monitor. I am Edit: Using the Go...

Hello everyone, Is there a Gimbal Solution for mounting the Sequoia? Please advise. Thanks, Avi

Hi Been lurking for a while, trying to figure out a problem I've had for a few months-basically at the end of my tether so here goes-the problem is quite simple: My P4 wont fly straight. If I push the right stick forward, the P4 will fly straight-and then start to drift to the right-every...

Hey folks, crashed my P3S today again and the camera tore off from the ribbon cable, where can i get the little screw that holds the camera onto the motor? Thanks in advance for your help.

I got my drone back about 2 weeks ago after a long long long repair process. I also brought a ND filter to be ready when the drone arrived back. When I got the drone I flew it a few times with the normal lens and everything was good and normal. I went to change the lens to the ND filter and as...

Has anyone had this problem? The infamous gimbal yaw to the right and motor errors has always been a problem. But now my gimbal cable is getting the gimbal stuck at startup, one can hear it click click when it tries to go down. I think some condensation got onto the cable and it made it...

Hey all, Just opened my new Phantom 3 and tried to connect it to the app, but the camera isnt showing anything on my phone screen and when I click on the status it says gimbal disconnected. I did all the steps the instructional videos said to do when starting up the drone, but nothing seems to...

Hi everyone! I have only one problem with my phantom 3 4k. I turn it on, and all works perfect: gimbal, lights, sounds, etc. When it's finished, gimbal stops and do nothing. Firmware: 1.5.70 I uploaded an small video showing it on youtube. Did anyone find a solution? I looked for another...

So back in February it was a really nice day in New England and I decided to take my P3P up over a pond. And it's a pretty big pond. I took some shot some nice video there and then BOOM. Tree that I did not see because I was stupid and was not looking at the view finder. I was flying towards...

Hello everyone, Today i was flying my p4p and I hit a tree with a alltitde of less than 2m and the drone hit the ground on the back, the propereller was all good but the gimbal yaw broken. The gimbal can not turn right or left, sometimes shakes and sometimes doesn't move, I don't know if I...

Eu tenho um fantasma de 3 4k (não o Phantom 3 Pro 4k), está dando a mensagem: na imagem do sinal. Eu tentei atualizar o firmware pela aplicação e não estava indo, decidiu baixar o firmware. Bin e atualizar pelo cartão de memória, a atualização foi concluída com sucesso, apenas não retornou a...

After a firmware update, my gimbal started going crazy and the gimbal motors made a really loud sound and also heated up. Anyone have any suggestions on how to fix this?