Problem:
After take off, one foot airborne, I have a battery power drain and fail safe mode goes active. Prior to startup the battery is full. At idle, battery still reading above 3.95. Then lift off and I get a power drain, indicated by external battery meter and dji goes into safe mode. I removed the props and applied full power while dji phantom 1 remains on the ground and no power drain occurs.
Tested:
Multiple batteries
Ensured props installed correctly
Reviewed internal wiring and nothing appears disconnected.
Nothing added to system providing additional weight (gimbal, fpv, gopro) when problem occurs
Need help trying to determine what might be happening.
This started occurring after a crash
Thanks
After take off, one foot airborne, I have a battery power drain and fail safe mode goes active. Prior to startup the battery is full. At idle, battery still reading above 3.95. Then lift off and I get a power drain, indicated by external battery meter and dji goes into safe mode. I removed the props and applied full power while dji phantom 1 remains on the ground and no power drain occurs.
Tested:
Multiple batteries
Ensured props installed correctly
Reviewed internal wiring and nothing appears disconnected.
Nothing added to system providing additional weight (gimbal, fpv, gopro) when problem occurs
Need help trying to determine what might be happening.
This started occurring after a crash
Thanks