Re: Setting up the Futaba T8FGS with the P2
How did you install the profile on a 14SGH? I didn't think that was possible! Good news if it is.
How did you install the profile on a 14SGH? I didn't think that was possible! Good news if it is.
- Gimbal power setting, I am not sure but mine is off and it works. I've read elsewhere it is only for non-Zenmuse gimbals but who knows if that is actually correct.
- Not sure what you mean by "lethargy". The auto-tilt is meant to be very slow to help with filming. RS will tilt the gimbal as normal. Make sure to calibrate X1 as per the instructions (with SB centered).
- Two green flashes is consistent with Naza M mode when you have a control input (one with everything neutral). Check LD make sure it is centered. If that isn't it, check your calibration. If you don't have the throttle spring, that could be it too.
- As for triple rate, see the description in the first post. It is a curve and effects all controls except throttle, yaw more than the others.