Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Remote Control

Discussion in 'Phantom 2 Vision + Discussion' started by Dossse, Aug 4, 2014.

  1. Dossse

    Joined:
    Aug 4, 2014
    Messages:
    1
    Likes Received:
    0
    Yesterday was flying with no problems. And today with no reason remote control doesn't turn on. It shows green light for 2 sec, then bleeps and then red light for 1 sec and turns off.. have bought batterys and changed but again the same.. any suggestions ?
     
  2. IrishSights

    Joined:
    Jan 14, 2014
    Messages:
    1,410
    Likes Received:
    37
    Location:
    Bangor, Northern Ireland, UK
    Try recalibration of tbe remote control through the RC Assistant and see if that helps.
     
  3. Dirty Bird

    Joined:
    Apr 15, 2014
    Messages:
    0
    Likes Received:
    9
    Location:
    Glen Burnie, MD - USA
    Make sure your batteries are making good contact with the battery contacts, and verify there is no corrosion on the terminals. If still no go, remove the back of the controller. There is a small reset button on the main circuit board inside. Hold the reset button while powering on the controller. If successful, recalibrate the controller afterwards.