First off, Thank you all for resolving issues for us. This is definitely a great site to learn from the experienced!
Have had my Phantom3 Advance since the first week of August. About three weeks ago I took her on my longest flight yet of about 3k feet. Simply far enough to maximize my own record and learn not to wet myself. After returning home the following day. I to began to receive the "No signal" problem. Almost losing my aircraft due to video lag, which led to overcompensating in my control of the aircraft. From that point on, I to have had worry of losing my investment.
Viewing posts here since that time, I realized it was not an issue with just myself. It continued to get worse at times from 10ft to 1000ft. "No signal" would simply appear without reason. Then the "remote update" appeared and I hoped it would resolve the issue. However, I of course wanted to wait and see how the updated worked for others before I did it. Realizing the issue "No signal" seems to continue, or start for most people. I haven't updated my IPad to 9, nor my controller with the new update.
So I began to debug daily with flights, to try and resolve the matter. To make the long story shorter. I now have fixed my issue, and hope to help some experiencing similar issues.
If you have an issue with "No signal", try the following.
1. Always reboot your device before any flight!
2.Ensure to have maximum Free Space available on your device.
3.Change your in app video back to 1080p!
Changing my video from 2.7k back to 1080p. Stopped all of my "No signal" issues. I now have no lag in control or video. Several flights now and working great. Like it did in August! Hope this info will help some of you...
Have had my Phantom3 Advance since the first week of August. About three weeks ago I took her on my longest flight yet of about 3k feet. Simply far enough to maximize my own record and learn not to wet myself. After returning home the following day. I to began to receive the "No signal" problem. Almost losing my aircraft due to video lag, which led to overcompensating in my control of the aircraft. From that point on, I to have had worry of losing my investment.
Viewing posts here since that time, I realized it was not an issue with just myself. It continued to get worse at times from 10ft to 1000ft. "No signal" would simply appear without reason. Then the "remote update" appeared and I hoped it would resolve the issue. However, I of course wanted to wait and see how the updated worked for others before I did it. Realizing the issue "No signal" seems to continue, or start for most people. I haven't updated my IPad to 9, nor my controller with the new update.
So I began to debug daily with flights, to try and resolve the matter. To make the long story shorter. I now have fixed my issue, and hope to help some experiencing similar issues.
If you have an issue with "No signal", try the following.
1. Always reboot your device before any flight!
2.Ensure to have maximum Free Space available on your device.
3.Change your in app video back to 1080p!
Changing my video from 2.7k back to 1080p. Stopped all of my "No signal" issues. I now have no lag in control or video. Several flights now and working great. Like it did in August! Hope this info will help some of you...