- Joined
- May 23, 2015
- Messages
- 5
- Reaction score
- 6
I've had a pulsating vibration especially noticed in the feet of the P3P, which I believe is causing camera pulsating vibrations as well. Shaking noticed on recorded objects whether wind or not. The vibration on recordings is in cycles by a second or two. The vibration in the landing gear is high frequency and also delayed by every second or two cycles.
I've had the P3P for about a week, with about 10 flights so far. The firmware is up to date as of 5/23, IMU calibration done on a level surface with gimbal calibration, multiple props changed, foam removed from gimbal, ISO 100 at 1080p 30 and 60 tried as well as 4k 30.
Any thoughts? Current firmware issues, hardware, or camera settings? Any recommendations on camera settings beyond the settings mentioned above?
Unfamiliar with ND filters and whether this could help vibrations or just contrast?
Thanks for any suggestions or help,
Ryan
I've had the P3P for about a week, with about 10 flights so far. The firmware is up to date as of 5/23, IMU calibration done on a level surface with gimbal calibration, multiple props changed, foam removed from gimbal, ISO 100 at 1080p 30 and 60 tried as well as 4k 30.
Any thoughts? Current firmware issues, hardware, or camera settings? Any recommendations on camera settings beyond the settings mentioned above?
Unfamiliar with ND filters and whether this could help vibrations or just contrast?
Thanks for any suggestions or help,
Ryan