OK I wanna figure out what just went wrong just now. I've Ben flying everyday since thankssgiven and rth to we're ever I took off from or too whereever Im standing with remote .this time it flew back above me and I was standing close to trees so decided to click rth cancel on the go app.. So I pushed the "X" to cancel rth . the p3 started slowly shooting of like I was holding the stick to fly straight ahead ..it flew off faster until I would pull back on the stick . so then I lose connection again totally and it lights up with the rth flashing lights turn on and starts decending down and butt not straight down it was at a angle and it was fast .. About 5-10 seconds before i d lose sight of it I clicked off the power to remote hopeing it would rth with the 280ft setting butt didn't and crashed .. So after tripping over myself to find my keys to jump in my truck to go look for it. I seen sum guy standing in front of his house holding it . it was still flashing all lights and it was running at full throttle. Gimble snaped off hanging there..so I run up to him and he says can ya shut this F***n thing off !!!!! So I turn on remote and green light turned on .. I held stick down and to corners I wouldn't shut off so I took it from him and held up to a fence and let the props break off so I could pull battery out. Any ideas what went wrong? I just zipped tied gimbal back on to turn on and run and all seems fine just like when I took off earlier slow flashing green lights go app connects wtf!!?? Do I try to fly it or not