Hi
@Oso
With current issues I'm not prepared to link Inspire RC to P3P - the Inspire is our workhorse & can't afford to risk any more additional issues
Very frustrating.
On your Samsung tab, have you tried the following?:
settings, apps, dji go, set as default, clear defaults
If you have litchi installed, try also this:
settings, apps, litchi, set as default, clear defaults
After having cleared the defaults:
With the P3P turned off, the RC turned off and the tab turned on:
1) connect the RC USB cable to the still running tab
2) turn on the RC
3) confirm likely USB charging dialog pop up with yes (charging pop up may even come with USB developer options fixed to MTP)
4) a selection window between dji go and litchi should pop up: select dji go (this sets the default you cleared in the beginning to dji go)
5) dji go starts and after the intro the screen stays on the inspire imgage with a grey enter camera button
6) now turn on your P3P: the P3P image with a blue enter camera button should appear: tap it and the P3P camera view should appear
Good luck!