- Joined
- Sep 18, 2015
- Messages
- 33
- Reaction score
- 3
I was doing some flying at a golf course yesterday and had an interesting experience. 1/2 of the course is in a NFZ and 1/2 is not. I taped some foil on my P3P and flew in ATTI to get some low flying shots in the NFZ, well below the tree line. After flying at that hole, I shut down the drone, and drove to an area that I thought was out of the NFZ. While the drone was off, I took off the foil and powered everything up. I noticed that the map and home point updated, but I was still in the NFZ. (turns out the NFZ extended onto the back 9, and I thought it was the front 9, so I was deeper into the NFZ than I was during the first flight). I thought I was going to have to fly with the foil on again, but it allowed me to take off and fly WITH GPS.
I can't remember 100%, but I think I forgot to take it out of ATTI mode when I powered up the 2nd time, then flipped the switch to P before I took off.
Any ideas why this happened? Is this a glitch and how safe is it to try and replicate? I'm unsure what would happen if it suddenly realized it was flying in a NFZ mid flight.....
I can't remember 100%, but I think I forgot to take it out of ATTI mode when I powered up the 2nd time, then flipped the switch to P before I took off.
Any ideas why this happened? Is this a glitch and how safe is it to try and replicate? I'm unsure what would happen if it suddenly realized it was flying in a NFZ mid flight.....