- Joined
- Jul 28, 2014
- Messages
- 3
- Reaction score
- 0
Complete newbie here, and I'm sure this is basic, but been trying to solve all day and need some help.
Purchased Phantom 2 with GP3 and the Zenmuse H3-3D, installed by folks at B&H. Charged everything up, attached the GoPro and fired up the controller and then tried to start the Phantom. All I get, repeatedly, is all 4 green lights on battery lighting up, and if I hold button down long enough (2-3 seconds) the red light in the middle of the power button blinks for a few seconds, then the shuts down. I don't know what to do beyond this.
Any help for a complete beginner would be greatly appreciated.
Greg
Purchased Phantom 2 with GP3 and the Zenmuse H3-3D, installed by folks at B&H. Charged everything up, attached the GoPro and fired up the controller and then tried to start the Phantom. All I get, repeatedly, is all 4 green lights on battery lighting up, and if I hold button down long enough (2-3 seconds) the red light in the middle of the power button blinks for a few seconds, then the shuts down. I don't know what to do beyond this.
Any help for a complete beginner would be greatly appreciated.
Greg