- Joined
- Jul 21, 2014
- Messages
- 49
- Reaction score
- 1
T mobile
I go from blue to the green
i have taken out the flytrap cable and hooked back up to gps. recalibrated, compass dance . It still wants to take off and I have to go catch it. Recalibrated IMU
This is a better summary
I would sure appreciate any thoughts.
yesterday i added my flytrex live, which was working. to my PV2+
when i took the top of the shell off on the PV2+ to connect the gps wires, the only connection from the shell to the board was the GPS. Am I missing a connection from the top of the shell to the phantom?
My first fight I had 7 satellite locks. i took off and the phantom went crazy, flying right and left. Did not respond to controls and crashed into the grass. Only prop damage.
I have since done advanced IMU calabration x 2- No change. Still won't stay in one area. Doesn't really hover, it just takes off I remain in gps phantom GPS mode, and both switches are in the up position. It was working fine before I put the flytrex live in
I rechecked the flytrap cable and they were tight.- Same problem
I took the flytrex cable out, still have the flytrex on board, but only connected to power. Same issue
Today I switched to NAZA mode and than switched back to phantom mode to try and set defaults.
I always have a good satellite lock
I have calibrated the sticks to the controller and than from the controller to the phantom numerous times
any thoughts would be appreciated.
I have attached some pictures of my current calibration
Thanks in advance
I go from blue to the green
i have taken out the flytrap cable and hooked back up to gps. recalibrated, compass dance . It still wants to take off and I have to go catch it. Recalibrated IMU
This is a better summary
I would sure appreciate any thoughts.
yesterday i added my flytrex live, which was working. to my PV2+
when i took the top of the shell off on the PV2+ to connect the gps wires, the only connection from the shell to the board was the GPS. Am I missing a connection from the top of the shell to the phantom?
My first fight I had 7 satellite locks. i took off and the phantom went crazy, flying right and left. Did not respond to controls and crashed into the grass. Only prop damage.
I have since done advanced IMU calabration x 2- No change. Still won't stay in one area. Doesn't really hover, it just takes off I remain in gps phantom GPS mode, and both switches are in the up position. It was working fine before I put the flytrex live in
I rechecked the flytrap cable and they were tight.- Same problem
I took the flytrex cable out, still have the flytrex on board, but only connected to power. Same issue
Today I switched to NAZA mode and than switched back to phantom mode to try and set defaults.
I always have a good satellite lock
I have calibrated the sticks to the controller and than from the controller to the phantom numerous times
any thoughts would be appreciated.
I have attached some pictures of my current calibration
Thanks in advance