http://i976.photobucket.com/albums/ae24 ... _0687R.jpg
http://i976.photobucket.com/albums/ae24 ... _0686R.jpg
http://i976.photobucket.com/albums/ae24 ... _0685R.jpg
http://i976.photobucket.com/albums/ae24 ... _0684R.jpg
http://i976.photobucket.com/albums/ae24 ... _0683r.jpg
Planning to do a little field crop inspection for my nephew and needed a camera facing straight down and still allow using the PV2+ camera to watch for approaching trees. I made this mount out of .080" (2mm) ABS and heat formed the ends to elevate the camera. The various cutouts are for reducing weight as well as increasing flexibility to minimize/prevent jello.
There is a hole along each side for a small safety zip-tie if desired.
Edit: The mount weighs in at about 15 grams.
http://i976.photobucket.com/albums/ae24 ... _0686R.jpg
http://i976.photobucket.com/albums/ae24 ... _0685R.jpg
http://i976.photobucket.com/albums/ae24 ... _0684R.jpg
http://i976.photobucket.com/albums/ae24 ... _0683r.jpg
Planning to do a little field crop inspection for my nephew and needed a camera facing straight down and still allow using the PV2+ camera to watch for approaching trees. I made this mount out of .080" (2mm) ABS and heat formed the ends to elevate the camera. The various cutouts are for reducing weight as well as increasing flexibility to minimize/prevent jello.
There is a hole along each side for a small safety zip-tie if desired.
Edit: The mount weighs in at about 15 grams.