Like I wrote before:
Take a very close look at your flight altitudes !
Ground Elevation at WP6 is 146ft above 1st waypoint, your flight altitude is 194ft above ground elevation at WP1, so your drone would only be flying 48ft above the ground at WP6.
In my opinion your drone crashed into the bushes.
In order to keep a constant AGL (Above Ground Level) you must add or substract the Grond Elevation difference at each waypoint compared to WP1.
An easy way to do so is using 'Batch Edit' on your smart device.
I suggest you first study the help-section on the Litchy webpage before flying long missions.
Do you realise that you could easily fly into somebody's face if there was a really steep hill ?
Help - Litchi
"
Waypoint Settings
- Altitude: The altitude of the waypoint relative to the elevation of the aircraft where it took off. The waypoint's altitude is also shown above the waypoint marker on the map."View attachment 85423