Hi all New to the forum but have been flying for a over a year now. Tried Litchi way-points for the first time last night. Started in P mode to make sure the compass was calibrated then moved to F mode and flew up close to my first way-points altitude. I then engaged the mission with out issue. ( This mission will take the unit out of radio contact but was confident based on all that I read that it would finish the mission). first way-point was a success and then the signal started to drop and I did not panic as the GPS map still showed the unit moving toward the destination. after about 30-40 sec's of no signal of picture I walked up m,y stairs a bit and the image popped back on with a weak signal. The unit was now hovering after but not RTH or completing the mission. So i jumped in the car and drove over to where the last image I saw was. Long story short i got the unit back after it auto landed it self from a low battery and driving around looking in peoples yards.
I do not recall pressing anything or changing anything after the signal loss, i am wondering why the unti would not have completed the mission and come home... any thoughts ?
I have flight logs and data in Excel form if anyone wants to take a crack. I am hoping it was glitch as i want to try a long distance mission again.
Thanks
Dan
I do not recall pressing anything or changing anything after the signal loss, i am wondering why the unti would not have completed the mission and come home... any thoughts ?
I have flight logs and data in Excel form if anyone wants to take a crack. I am hoping it was glitch as i want to try a long distance mission again.
Thanks
Dan