Well, slap me silly! I tried to upgrade the firmware of the RC by using the "3 bars" button on the first screen with the "5 second long touch" to open the upgrade Screen and there the latest Version is 1.8. I't is only after i press the "Enter Device / Start Flight" screen and then on the warning in "Overall Status" that it showed the download option and downloaded V1.9.2 and now it is connecting. I'll do my test flight tomorrow and report my findings. Oh, also did the upgrade without the SD card as some has suggested here. Will see how it goes. Thanks!
So, I did the weird new IMU Calibration and calibrated the Gimbal and I could not get the Horizon level on my kitchen counter. Took it for a flight, and it seemed to level itself out good with zero roll adjustment.
I have noticed what some people mentioned:
1. Unstable hovering. It also Iooks like I fell victim to this, until I have set it to "ATTI" mode and watched the drone drifted away from me level and steady at a speed of 16KM/H (10mph). I did not realize until then the moderate and choppy breeze. But yes, it does seems a bit skittish. Will test on a windless day again.
2. High wind velocity warning. I was about 400metres(1200ft) out at 30metres(100ft) in the air when I got the warning. Again, switched to "ATTI" mode and so it reaching a speed of over 25km/h (15mph). Again, one does not realize what the wind speed is up there.
The other possible issue I can report is degraded live video feed quality.Resolution seems lower than normal. Will do some more testing.