PapaTita, I was waiting to meet you.
Thank you for your help.
please find my uploaded log files.
As I said in previous thread;
1) I couldn't access wifi with my iphone at first. It required password i've never change. And the password 12341234 was not matched. Sometimes, wifi name was disappeared So I couldn't even find it on my laptop. (Windows XP)
2) I reset my RC wifi using gymbal upside + S1 toggle. Then I could access to wifi with my iphone. I checked wifi connection symbol in DJI Go App. But not iphone status bar. It was still cell network symbol, not wifi symbol.
Could you tell me what was the problem and how can I fix it?
Always, thank you for help.
09:13
09:13 ============================================
09:13 Restart your RC & Aircraft and Enjoy New Mod
09:13 ============================================
09:13
09:13 Credit to: Ojcze Nasz, SingLag, Argonaise &
www.phantompilots.com
Disconnected.
Disconnecting.
09:13 Access Point: 60:60:1F:0C:3F:5C
Mode: Master Channel: 10 (2.457 GHz)
Tx-Power: 27 dBm Link Quality: 70/70
Signal: -35 dBm Noise: -95 dBm
Bit Rate: 101.1 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan0.sta1 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Master (VLAN) Channel: 10 (2.457 GHz)
Tx-Power: 27 dBm Link Quality: 70/70
Signal: -40 dBm Noise: -95 dBm
Bit Rate: 130.0 MBit/s
Encryption: none
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
/ #
09:13 winfo
wlan0 ESSID: "PHANTOM3_0c3f5c"
09:13
BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # iw reg set BO
/ # iw dev wlan0 set txpower limit 2700
/ # i
09:13 iwinfo
09:13 iw dev wlan0 set txpower limit 2700
09:12 iw reg set BO
Connected.
Connecting to 192.168.1.1.
Disconnected.
Disconnecting.
09:12 ==================
09:11 File upload OKE
09:11 Checking file ...
09:11 Update djiled.sh on Aircraft
09:10 File upload OKE
09:10 Checking file ...
09:10 Update djiled.sh on RC
09:09 Final process ...
09:09 hmod 775 /sbin/watchlog.sh
/ #
09:09 c
09:09 chmod 775 /sbin/watchlog.sh
09:08 winfo
wlan0 ESSID: "PHANTOM3_0c3f5c"
Access Point: 60:60:1F:0C:3F:5C
Mode: Master Channel: 10 (2.457 GHz)
Tx-Power: 17 dBm Link Quality: 70/70
Signal: -33 dBm Noise: -95 dBm
Bit Rate: 101.1 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan0.sta1 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Master (VLAN) Channel: 10 (2.457 GHz)
Tx-Power: 17 dBm Link Quality: 70/70
Signal: -39 dBm Noise: -95 dBm
Bit Rate: 130.0 MBit/s
Encryption: none
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
/ #
09:08 i
09:08 iwinfo
09:07
BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
09:07 ==================
09:07 Telnet ready ...
Connected.
Connecting to 192.168.1.1.
09:07 Aircraft Ready ...
09:07 RC Ready ...
09:46
09:46 Please proceed to STEP 2
09:46
09:45 File upload OKE
09:45 Checking file ...
09:45 Upload watchlog.sh to RC
09:45 File upload OKE
09:45 Checking file ...
09:44 Configure Telnet to RC
09:43 Aircraft Ready ...
09:43 RC Ready ...
09:43 Scan Channel
09:43 Select Menu: Patch to FCC - RC Only RECOMENDED
